| Title:
A look at razor slitting - Slitting Technology,
part 1 - Column | READ
ARTICLE |
| Author:
William E. Hawkins |
| One of the more common
problems converters encounter during razor
knife slitting on thermoplastic films is the
thickening of the web material in the area
of the cut. This occurs because the blade
blocks the flow of the web, much like a protruding
rock blocks and divides the flow of water
in a stream. The stream thickness increases
in front of and near the sides of the rock
due to blocked and retarded flow. READ
MORE! |
| URL
on Web: http://pffc-online.com/mag/paper_web_handlingmaking_slitterwinder/
|
| COPYRIGHT 1999 PRIMEDIA
Business Magazines & Media Inc. All rights
reserved. COPYRIGHT 2004 Gale Group |
About Us
Technical Articles 
TECHNICAL ARTICLES